摘要:Plate shaped sandstones containing two fabricated circular holes that were filled with gypsum and high-strength concrete respectively were prepared for studying the effects of ligament length L ligament incline angle α, as well as filling modes on their strength properties and failure modes. The results show that the initial cracks can be categorized as wing crack, axial tensile crack and curved tensile crack. The failure modes of ligaments can be categorized as mode of single inclined crack, mode of single axial crack and mode of two parallel cracks. The final failure modes of all specimens can be categorized as the tension-shear mixed failure and shear failure. The strength of inclusions shows little influence on the final failure modes of specimens, while the failure modes vary with L and α. When α is a fixed value, the peak strength σc and elastic modulus Ec of tested specimens increase firstly with increasing L and reaches to the maximum value at L of 16 mm, then declines. When L is a fixed value, σc declines firstly and then turns to increase as α increases to 75° from 45°, while Ec increases linearly. The axial stress σp performs the similar variation trends with those of σc versus increasing L and α when ligaments fail.
关键词:sandstone two circular holes inclusions
单位:State; Key; Laboratory; for; Geomehanics; &; Deep; Underground; Engineering; (China; University; of; Mining; and; Technology); Xuzhou; 221116; China
注:因版权方要求,不能公开全文,如需全文,请咨询杂志社
相关期刊
ITS通讯 Advances in Atmospheric Sciences Journal of Systems Science and Complexity Science China Earth Sciences Research in Astronomy and Astrophysics Science China Mathematics Science China Chemistry Transactions of Nonferrous Metals Society of China Journal of Systems Engineering and Electronics Chinese Annals of Mathematics,Series B相关范文
sts教育论文